82 Chevy K Blazer

mikev · 05-31-2012, 10:06 PM

82 Chevy full-size Blazer for sale. $3500 obo
35" BFG Muds
14 bolt rear, dana 44 with Detroit Locker, Warn hubs front, both 4:11s
4" Skyjacker lift, greasable poly bushings
Sway bar disconnects
Steering box reinforcement
355 Chevy, off road cam, headers, rebuilt heads, dual-plane al intake, new radiator, etc
4 speed manual trans with super low first, good transfer case
Solid frame, some body rust
new bed
Tailgate is rough, but stays closed and window rolls up and down
Good half top with sliding windows
Removable face CD player
Very good truck, I just don't have time to play with it right now - new job, 2 kids, etc...
I've had it about ten years, now you can have fun with it. It is super easy to work on.
937-469-0904 to discuss. In Lebanon between Cinci and Dayton.

Trigger · 06-01-2012, 12:27 PM

Any pictures? What are the cam specs? What was done to the heads?

mikev · 06-01-2012, 10:44 PM

I'll take a look for the cam specs. It isn't anything huge, but was intended to give more torque and a little more hp. Both heads were cracked but drivable a few years back, so I bought a set of reconditioned heads from Performance Clinic east of Dayton. Basic valve job.
It isn't a trailer queen, but rather a good, fun, street-able truck with many uses including playing on muddy trails. It is the typical black exterior with blue Hawaiian seat covers over red houndstooth buckets. The dash is silver as the exterior once was. There is a red console that could be installed. No carpet - I rhino-lined the floor pans for traction and durability. The bed is just painted, not rhino-lined. The frame was scraped and painted with por50 pu paint.
I loved on it a while ago. Just no time now.

mikev · 06-11-2012, 10:35 PM

How can you pass this up?
Someone out there must want 5080 lbs of American Steel that can be driven on the street, up a mountain, through a stream, through the mud, bring home tons (literally) of stuff, bring home 48" wide plywood or drywall, carry 4 people and camping gear, plow snow, pull a trailer, and be the envy of the neighbors. The tires are almost brand new - did I mention there are five?
Come see it or meet me somewhere, then make an offer. I'm not playing with it anymore - you could be.

NKYJEEPSTER · 06-11-2012, 11:27 PM

is this carb or injected?

blazerbrad · 06-12-2012, 09:02 AM

Quote:

Originally Posted by NKYJEEPSTER

is this carb or injected?

If stock it would be carb'd, the factory did not produce EFI versions until '87.

mikev · 06-20-2012, 11:47 PM

It is a quadrajet carb. Rebuilt a few years ago. Sits on a dual plane aluminum intake. HEI distributor. On sale now for less than a dollar a pound!
Sorry about the slow reply.

mikev · 07-11-2012, 10:55 PM

So, not $3500. How much?

yellowjacket · 07-12-2012, 05:06 PM

I don't think ur price is bad.specially if motor is peppy. Id be into it but found me a trail beater project already.

love them k5's though. that got the bulldog first gear in it?

mikev · 07-18-2012, 09:23 PM

Hi yellowjacket. I'm not sure what the bullfrog first is, but first is really low and not synched - so maybe. In 4low, first, even with 35s, you can dump the clutch at idle and it just starts crawling forward. You can feel every rotation. It's fun.
This truck could be more than just a trail beater. With a little tlc it could be a daily driver. It would be good to own a gas refinery or be an oil sheik, but that's part of the joy of a 350 I suppose.

Thanks for the feedback on the price. It's still in my garage waiting for you, if you change your mind.
Mike

underpowered · 07-18-2012, 09:27 PM

bein an 82 stick shift, it will have the SM465 Tranny. 4 speed, bulldog first gear of like 7.14:1 ratio. Very stout and still widely used tranny.

mikev · 12-25-2012, 11:49 PM

I would still like to see this go to someone that will have some fun with it.
Write back. Could be your next project... Make an offer.

mikev · 01-03-2013, 10:20 PM

I would have loved to find this a few years ago for three thousand dollars. Now, she can be yours. (937)469-0904. Mike

mikev · 01-20-2013, 09:43 PM

So, not $3000. Make an offer. I would really like to clear this off my driveway.

mikev · 03-01-2013, 12:31 AM

$2500 and it's yours.

Nuts · 03-02-2013, 11:40 AM

Whats the top speed on the highway? I'm curious if the 35s make up for the 4;11s and no overdrive.

JeffK5 · 03-02-2013, 11:53 AM

Any trades?

blazerbrad · 03-02-2013, 10:29 PM

Quote:

Originally Posted by Nuts

Whats the top speed on the highway? I'm curious if the 35s make up for the 4;11s and no overdrive.

I'm sure it would run over 100 mph if you wanted it to. My 2500HD with 4.10's and 32-ish" tires would run in 3rd gear (locked out OD when towing real heavy) at 70 mph at maybe 3,000 rpm. With 35's I would think maybe 2,700-2,800 range at 70 mph which isn't that bad.

mikev · 03-02-2013, 10:38 PM

It cruises at highway speed (about 70mph) just fine. I've never tried for a hundred, but maybe!

As far as trades, probably not. I simply don't have time right now for a project vehicle. But, what were you thinking of trading?

Trigger · 03-03-2013, 08:18 AM

I'm interested. Can I get some more pictures? Rust, tailgate, interior?

Sent from my ADR6400L using Tapatalk 2

mikev · 03-03-2013, 11:23 PM

I'll work on some pictures. You want me to post them here, or send you an email. I think I put a bunch of photos in a PowerPoint deck a few months ago. That work? What's your email?
The tailgate, inner wheel wells, and a few areas of the fenders have most of the rust. The frame is really pretty good.
The interior is sparse. I took out all the fabric coated cardboard as it was kinda nasty afte 30 years. The bed and floor are solid.
I isn't a new truck, though. I wouldn't recommend it as a daily driver if you drive very far.
Let me know what works best fo you.

JeffK5 · 03-04-2013, 09:12 PM

Quote:

Originally Posted by mikev

As far as trades, probably not. I simply don't have time right now for a project vehicle. But, what were you thinking of trading?

I've got a semi-built Honda 250R that I've been wanting to trade/sell for a mild rig or family ATV.

mikev · 04-01-2013, 11:22 PM

No thanks on the Honda 250. Would be fun, but not right now. Thanks.

mikev · 06-03-2013, 12:28 AM

Bump bump bump...
I can't believe no one wants this. Clean title, road worthy, super tough and big. easy to work on. What more can I say?
How about $2300 and it's yours?
I just don't have time any more.
Mike 937-469-0904

05-31-2012, 10:06 PM	#1
mikev Join Date: May 2012 Posts: 16	82 Chevy K Blazer 82 Chevy full-size Blazer for sale. $3500 obo 35" BFG Muds 14 bolt rear, dana 44 with Detroit Locker, Warn hubs front, both 4:11s 4" Skyjacker lift, greasable poly bushings Sway bar disconnects Steering box reinforcement 355 Chevy, off road cam, headers, rebuilt heads, dual-plane al intake, new radiator, etc 4 speed manual trans with super low first, good transfer case Solid frame, some body rust new bed Tailgate is rough, but stays closed and window rolls up and down Good half top with sliding windows Removable face CD player Very good truck, I just don't have time to play with it right now - new job, 2 kids, etc... I've had it about ten years, now you can have fun with it. It is super easy to work on. 937-469-0904 to discuss. In Lebanon between Cinci and Dayton. Last edited by mikev; 05-31-2012 at 10:07 PM. Reason: Added price

06-01-2012, 10:44 PM	#3
mikev Join Date: May 2012 Posts: 16	Update I'll take a look for the cam specs. It isn't anything huge, but was intended to give more torque and a little more hp. Both heads were cracked but drivable a few years back, so I bought a set of reconditioned heads from Performance Clinic east of Dayton. Basic valve job. It isn't a trailer queen, but rather a good, fun, street-able truck with many uses including playing on muddy trails. It is the typical black exterior with blue Hawaiian seat covers over red houndstooth buckets. The dash is silver as the exterior once was. There is a red console that could be installed. No carpet - I rhino-lined the floor pans for traction and durability. The bed is just painted, not rhino-lined. The frame was scraped and painted with por50 pu paint. I loved on it a while ago. Just no time now. Attached Thumbnails Last edited by mikev; 06-01-2012 at 11:12 PM.

06-11-2012, 10:35 PM	#4
mikev Join Date: May 2012 Posts: 16	5080 lbs of fun How can you pass this up? Someone out there must want 5080 lbs of American Steel that can be driven on the street, up a mountain, through a stream, through the mud, bring home tons (literally) of stuff, bring home 48" wide plywood or drywall, carry 4 people and camping gear, plow snow, pull a trailer, and be the envy of the neighbors. The tires are almost brand new - did I mention there are five? Come see it or meet me somewhere, then make an offer. I'm not playing with it anymore - you could be.

06-20-2012, 11:47 PM	#7
mikev Join Date: May 2012 Posts: 16	Carb It is a quadrajet carb. Rebuilt a few years ago. Sits on a dual plane aluminum intake. HEI distributor. On sale now for less than a dollar a pound! Sorry about the slow reply.

07-11-2012, 10:55 PM	#8
mikev Join Date: May 2012 Posts: 16	No interest? So, not $3500. How much?

06-01-2012, 12:27 PM	#2
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	Any pictures? What are the cam specs? What was done to the heads?

06-11-2012, 11:27 PM	#5
NKYJEEPSTER Join Date: May 2009 Location: Verona, KY Posts: 101	is this carb or injected?

07-12-2012, 05:06 PM	#9
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	I don't think ur price is bad.specially if motor is peppy. Id be into it but found me a trail beater project already. love them k5's though. that got the bulldog first gear in it? __________________ my next rig will be on the trail before zuk 2.0 will

07-18-2012, 09:23 PM	#10
mikev Join Date: May 2012 Posts: 16	1st gear Hi yellowjacket. I'm not sure what the bullfrog first is, but first is really low and not synched - so maybe. In 4low, first, even with 35s, you can dump the clutch at idle and it just starts crawling forward. You can feel every rotation. It's fun. This truck could be more than just a trail beater. With a little tlc it could be a daily driver. It would be good to own a gas refinery or be an oil sheik, but that's part of the joy of a 350 I suppose. Thanks for the feedback on the price. It's still in my garage waiting for you, if you change your mind. Mike

07-18-2012, 09:27 PM	#11
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	bein an 82 stick shift, it will have the SM465 Tranny. 4 speed, bulldog first gear of like 7.14:1 ratio. Very stout and still widely used tranny. __________________ beat up rusted out k5

12-25-2012, 11:49 PM	#12
mikev Join Date: May 2012 Posts: 16	I would still like to see this go to someone that will have some fun with it. Write back. Could be your next project... Make an offer.

01-03-2013, 10:20 PM	#13
mikev Join Date: May 2012 Posts: 16	Big Ugly for $3k I would have loved to find this a few years ago for three thousand dollars. Now, she can be yours. (937)469-0904. Mike

01-20-2013, 09:43 PM	#14
mikev Join Date: May 2012 Posts: 16	Bump So, not $3000. Make an offer. I would really like to clear this off my driveway.

03-01-2013, 12:31 AM	#15
mikev Join Date: May 2012 Posts: 16	$2500 and it's yours.

03-02-2013, 11:40 AM	#16
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Whats the top speed on the highway? I'm curious if the 35s make up for the 4;11s and no overdrive.

03-02-2013, 11:53 AM	#17
JeffK5 Tiny Member Join Date: Jan 2007 Location: Colerain Posts: 798	Any trades?

03-02-2013, 10:38 PM	#19
mikev Join Date: May 2012 Posts: 16	Fine on the highway It cruises at highway speed (about 70mph) just fine. I've never tried for a hundred, but maybe! As far as trades, probably not. I simply don't have time right now for a project vehicle. But, what were you thinking of trading?

03-03-2013, 08:18 AM	#20
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	I'm interested. Can I get some more pictures? Rust, tailgate, interior? Sent from my ADR6400L using Tapatalk 2

03-03-2013, 11:23 PM	#21
mikev Join Date: May 2012 Posts: 16	I'll work on some pictures. You want me to post them here, or send you an email. I think I put a bunch of photos in a PowerPoint deck a few months ago. That work? What's your email? The tailgate, inner wheel wells, and a few areas of the fenders have most of the rust. The frame is really pretty good. The interior is sparse. I took out all the fabric coated cardboard as it was kinda nasty afte 30 years. The bed and floor are solid. I isn't a new truck, though. I wouldn't recommend it as a daily driver if you drive very far. Let me know what works best fo you.

04-01-2013, 11:22 PM	#23
mikev Join Date: May 2012 Posts: 16	No thanks on the Honda 250. Would be fun, but not right now. Thanks.

06-03-2013, 12:28 AM	#24
mikev Join Date: May 2012 Posts: 16	$2300 - what a deal! Bump bump bump... I can't believe no one wants this. Clean title, road worthy, super tough and big. easy to work on. What more can I say? How about $2300 and it's yours? I just don't have time any more. Mike 937-469-0904