i have a 99 tj. dad recently put a new rear end in her with 3.73 gears the front still as the 3.07's. instead of buying a whol enew front end is there anyway to put a locker up front with 3.73. i kno i cant just change the ring and pinion because the whole carrier is deiffernt so i thought well i could lock the fron tend and throw some new shafts in there. any ideas
Announcement
Collapse
No announcement yet.
99 tj front end ?
Collapse
X
-
Not 100% sure what you're asking...
If you can find an entire D30 with the 373s, it'll save you the work/expense of getting the gears reset.
If you want to put 373s in your housing, yes, you will need either a new carrier, or a full case locker. Whichever you use, you'll need to get the new gears set up.
Your present axle shafts will work with the new gears/carrier/locker, no need for new shafts.
Basically, yes, since you've got to replace the carrier anyway, it'd be a great excuse to upgrade to a full case locker at the same time.
RobertDIRTY DEEDS, DONE DIRT CHEAP
Whatever doesn't kill you makes you stranger
-
any ideas on a good full case locker. i just need to get this thing with 3.73 in it. it would be easier to just find a 3.73 dana 30 but i need to come across one. all i see are the 3.07s which is the one that is on it now. thanksUNITED STATES MARINE
99 TJ, locked, long armed, creepy's
sigpic
Comment
-
Originally posted by carwash View Postcontact "gunrunner" on here. best gear guy i know. tell him i sent you.UNITED STATES MARINE
99 TJ, locked, long armed, creepy's
sigpic
Comment
Comment