yellowjacket buggy - Page 5

yellowjacket · 10-30-2011, 01:03 PM

since tranny fan was mounted between and behind seats i incorperated a cover for it into my center console. makes it a lot quieter and keeps the heat down i hope in summertime. i did reverse polarity and flipped "s" blade to blow thru toward back but idk which orientation it will end up as

Sent from my LS670 using Tapatalk

yellowjacket · 10-30-2011, 01:10 PM

working in garage always is good therapy for me. really clears ouut the cobwebs. i assume its the same for everyone else. anyway, order me a dist/ coil, plugs and wires and ill be firing the beast up. pretty exited, some guys i use to wheel with a lot are goin in a few weeks and i die a little inside everytime i cant go. so maybe next trip ill be ready.

anyone know anything about spark plug gap if running on propane?

Sent from my LS670 using Tapatalk

KargoMaster · 10-30-2011, 11:46 PM

Quote:

Originally Posted by yellowjacket

...and i die a little inside everytime i cant go...

You ain't kidding...

Just a guess on the plug gap, but I vaguely recall a one step "hotter" plug being appropriate... something about the codes on the plug... As I believe C3H8 burns slower, that theory doesn't seem to set off my BS meter...

yellowjacket · 01-08-2012, 06:56 PM

had a couple hours available this weekend. painted dash. among many other things, i am not a painter btw. if carwash dident like red so much id have left it shiny..

and put gauges in. still have to hook them up.

Sent from my LS670 using Tapatalk

yellowjacket · 01-08-2012, 06:58 PM

the other weekend i put in my atlas shifter i got from drivermod.spent some torchwork bending levers around the dash so they wouldent be in copilots knees. from here on out space is gonna be a precios commodity:)

Sent from my LS670 using Tapatalk

humpy · 01-10-2012, 08:31 AM

Looks like if u go from first to reverse in a hurry u gonna have sore knuckles??

94Dodge Truggy · 01-10-2012, 09:21 AM

That painter on your avatar pic paints happy clouds and trees! I used to watch him a few years back and I believe he is dead now. His fro was good for holding his painting supplies in.

yellowjacket · 01-10-2012, 10:16 AM

Quote:

Originally Posted by humpy

Looks like if u go from first to reverse in a hurry u gonna have sore knuckles??

good eyes! they are actually 9 inches from shifter in high and a lot farther in low....and i figured any 1st to rev panic shifts would be in low range... hey when u postin pics of ur secret tubework? i know ur building something:)

Sent from my LS670 using Tapatalk

humpy · 01-10-2012, 11:38 AM

Quote:

Originally Posted by yellowjacket

good eyes! they are actually 9 inches from shifter in high and a lot farther in low....and i figured any 1st to rev panic shifts would be in low range... hey when u postin pics of ur secret tubework? i know ur building something:)

Sent from my LS670 using Tapatalk

Honest to god ain't started nothin... Still finishing up sidework... Be startin mine soon... My garage big enough for one thing at a time

KillerKoatings · 01-10-2012, 01:32 PM

Is it me or can you no longer see the pics?

Flxratd · 01-10-2012, 01:50 PM

Quote:

Originally Posted by KillerKoatings

Is it me or can you no longer see the pics?

it wasnt just you but they are back now. i was thinking no matter how long i stared at that red x i still didnt see a buggy

FluxIndustries · 01-10-2012, 03:22 PM

The painter name is Bob Ross, with his soft speeking tone and drawn out words I think he may have enjoyed a happy little smoke before each show. Funny thing, my step father has the same fro.... priceless!

yellowjacket · 02-17-2012, 07:22 PM

finishing up skids and rockers tonight. ignore the nuts and threads sticking out- will be countersunk internal hex heads when its ready for the trail

Sent from my LS670 using Tapatalk

yellowjacket · 02-17-2012, 07:51 PM

broke up my orbital/ column mount

Sent from my LS670 using Tapatalk

yellowjacket · 02-17-2012, 07:55 PM

carefull drum sanding netted a perfect ffit for the column

ignore the metal dust and masking tape residue

Sent from my LS670 using Tapatalk

yellowjacket · 02-17-2012, 08:03 PM

engine ready to go( i think) . all wiring is done- just waiting to source a decent 3/8 " lug terminal block to tie my winch/starter/ accesories in at one point

Sent from my LS670 using Tapatalk

Redriverranger · 02-17-2012, 08:36 PM

Everything looks real nice. Should make an excellent rig.

jwend · 02-17-2012, 08:49 PM

when is it gona be done?? what are you lacking

yellowjacket · 02-18-2012, 10:51 AM

its so comfy in my shop im not sure it ever wants to be on the trail.....lol. still be a while before finished.

still for sale btw...someone wanna finish out a nice buggy? pm me for info:)

Sent from my LS670 using Tapatalk

oklahomawelder · 02-18-2012, 09:47 PM

I sent a guy your info to contact you that contacted me about mine after I had sold it. I also gave another guy your info that was wanting a chassis.

mckeddie · 05-17-2015, 10:45 PM

Just saw this for sale on pirate. Damn did it turn out nice!
http://www.pirate4x4.com/forum/vehic...las-buggy.html

yellowjacket · 05-20-2015, 10:26 AM

Yeah he texted me last week. When i sold it after the tornado, i told him if he ever sold it id like first dibs. So im glad he contacted me. But i told him about the house burning down last year and other bad luck so im not in a position.

But it is a good deal. I think i had close to 20k in materials in it when i sold it to him. And its small but fits a big guy very nicely.
Thanks for the link. Now i can drool over it:)

10-30-2011, 01:03 PM	#101
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	since tranny fan was mounted between and behind seats i incorperated a cover for it into my center console. makes it a lot quieter and keeps the heat down i hope in summertime. i did reverse polarity and flipped "s" blade to blow thru toward back but idk which orientation it will end up as Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

10-30-2011, 01:10 PM	#102
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	working in garage always is good therapy for me. really clears ouut the cobwebs. i assume its the same for everyone else. anyway, order me a dist/ coil, plugs and wires and ill be firing the beast up. pretty exited, some guys i use to wheel with a lot are goin in a few weeks and i die a little inside everytime i cant go. so maybe next trip ill be ready. anyone know anything about spark plug gap if running on propane? Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

01-08-2012, 06:56 PM	#104
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	had a couple hours available this weekend. painted dash. among many other things, i am not a painter btw. if carwash dident like red so much id have left it shiny.. and put gauges in. still have to hook them up. Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

01-08-2012, 06:58 PM	#105
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	the other weekend i put in my atlas shifter i got from drivermod.spent some torchwork bending levers around the dash so they wouldent be in copilots knees. from here on out space is gonna be a precios commodity:) Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

01-10-2012, 08:31 AM	#106
humpy Join Date: Sep 2008 Posts: 573	Looks like if u go from first to reverse in a hurry u gonna have sore knuckles?? __________________ S10 with a few air shocks..

01-10-2012, 09:21 AM	#107
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	That painter on your avatar pic paints happy clouds and trees! I used to watch him a few years back and I believe he is dead now. His fro was good for holding his painting supplies in. __________________

01-10-2012, 01:32 PM	#110
KillerKoatings Join Date: Jan 2011 Posts: 119	Is it me or can you no longer see the pics?

01-10-2012, 03:22 PM	#112
FluxIndustries Join Date: May 2011 Posts: 76	The painter name is Bob Ross, with his soft speeking tone and drawn out words I think he may have enjoyed a happy little smoke before each show. Funny thing, my step father has the same fro.... priceless!

02-17-2012, 07:22 PM	#113
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	finishing up skids and rockers tonight. ignore the nuts and threads sticking out- will be countersunk internal hex heads when its ready for the trail Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will Last edited by yellowjacket; 02-17-2012 at 07:28 PM.

02-17-2012, 07:51 PM	#114
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	broke up my orbital/ column mount Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

02-17-2012, 07:55 PM	#115
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	carefull drum sanding netted a perfect ffit for the column ignore the metal dust and masking tape residue Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

02-17-2012, 08:03 PM	#116
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	engine ready to go( i think) . all wiring is done- just waiting to source a decent 3/8 " lug terminal block to tie my winch/starter/ accesories in at one point Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

02-17-2012, 08:36 PM	#117
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Everything looks real nice. Should make an excellent rig. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

02-17-2012, 08:49 PM	#118
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	when is it gona be done?? what are you lacking __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

02-18-2012, 10:51 AM	#119
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	its so comfy in my shop im not sure it ever wants to be on the trail.....lol. still be a while before finished. still for sale btw...someone wanna finish out a nice buggy? pm me for info:) Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

02-18-2012, 09:47 PM	#120
oklahomawelder Tradin' Fool Join Date: Nov 2010 Location: Oklahoma Posts: 86	I sent a guy your info to contact you that contacted me about mine after I had sold it. I also gave another guy your info that was wanting a chassis.

05-17-2015, 10:45 PM	#121
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	Just saw this for sale on pirate. Damn did it turn out nice! http://www.pirate4x4.com/forum/vehic...las-buggy.html __________________ zuk buggy.....it'll be a jeep eventually.

05-20-2015, 10:26 AM	#122
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Yeah he texted me last week. When i sold it after the tornado, i told him if he ever sold it id like first dibs. So im glad he contacted me. But i told him about the house burning down last year and other bad luck so im not in a position. But it is a good deal. I think i had close to 20k in materials in it when i sold it to him. And its small but fits a big guy very nicely. Thanks for the link. Now i can drool over it:) __________________ my next rig will be on the trail before zuk 2.0 will